HP COLOR LASER JET 2550 SERIES IT WILL NOT PRINT, A LIGHT IS ON THAT SAYS IMAGING DRUM LIGHT...,, WHAT DO i DO? You will need to replace the image drum. This is either due to the face that you have ...
HP LaserJet 2840 Printer printing in color is terrible. washed out, red streaks, ink is full and just changed the drum, but all is after market. should I replace all ink and drum or get another ...
...HP 2840. It would not copy or print. The Ready light would not come up. It says "Replace cathrige". Ihave replace the black toner but to one of the color toner. Do you think replacing the color toner ...
...HP Color LaserJet 2820 and 2840 AiO Series Products - How to Replace the Imaging Drum Replace the imaging drum Push the scanner-release button to open the scanner assembly. Figure 1: Example of ...
Question about LaserJet 2840 All-In-One Printer
HP Color Laserjet 2840 now makes ear-splitting whine every time My HP Color Laserjet 2840 has always been loud but recently it started making an ear-splitting high-pitched whine as it rotates and ...
...color cartridges into my HP Laserjet 2840 printer, and colored dots are now appearing down the left side of the printed page: two dots close together, then a space of about 3/4", then one dot, then ...
HP 2840 Ghost printing in the bkg? Just installed new image drum and the first page was fine, but the second page printed the first page in the background (but lighter). What can I do? That is called ...
Question about LaserJet 2840 All-In-One Printer
HP Color LaserJet 2840 keeps showing 50.2 Fuser error message. Nothing helps correct problem. What to do? Have tried repeatedly turning printer off, waiting several seconds and turning on again. Each ...
Question about LaserJet 2840 All-In-One Printer
hp 2840 says to order a new one, but it's not that old and the number of copies printed is nowhere near 5,000 color or 20,000 black. Did I miss a step when putting the new drum in? Hi there Did you do
...HP LaserJet 2840 has a brand new Toner cartridge. Now it won't print at all and we are getting a "OPC at end of life" prompt. What does this mean? Imaging drum reach 20,000 (black only) ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions