Questions & Answers for: Dodge Durango replace purge valve

keep getting p0443 code and check engine light Obd scanner says the p0443 code is a short in the purge valve circuit. might need to replace the purge selonoid valve

...Replace purge Solenoid * Replace vacuum switch * Repair restriction in Evap line or canister or solenoid * Repair resistance in purge connector * Replace PCM Please rate and god bless:) P0441 ...

Can't ID a Valve.... What is the valve called next to the battery on right hand side? that might be the evap purge solenoid.two lines to it? larger plastic cap of sorts on it? if so thats what it is

...purge system,have been to the dodge dealership here at least 7 times, cannot figure out the problem. i work for the US MILITARY in korea, don't know what to do next, please advise....thank you either ...

...will **** closed, replace any cracked, broken or soft lines...If this does not solve the problem replace the purge valve...See picture below...guru...saailer... purge valve ..cost ...

...purge the line of air and fill it with pressurized fuel, this takes a few moments and this causes abnormally long crank times before the engine starts. I think on your truck the pressure check ...

purge valve 2001 durango cant find the location of the purge valve, been told two different locations firewall and next to gas tank It will be on the drivers side by the firewall and will look lik the

dodge durango po 441 check engine light is on, error code PO 441 P0441 indicates incorrect purge flow. You could have a problem with the purge valve, cannister, and/or vacuum lines.

...fuel cap.fuel tank sensor disconnected or failed. ORING on top fuel sending unit leaking.purge valve vapor line clogged disconnected or purge solenoid failed.vent solenoid not closing or has

...purge valve is up on the engine. the vent valve is by the gas tank or at the charcoal filter, the lines run from the tank and filter to the engine. the lines are plastic, except under the body, metal ...