Question about 2005 Corolla
what socket or drive is required to remove the front brake rotor on the 2005 Toyota corolla The 30mm axle nut does NOT get removed to remove a rotor. The 17mm caliper bolts must be removed to removed ...
...lamp fuse its in the engine compartment next to the battery in a black plastic case. It is about 8 inches long 2 inches wide and 2 inches
back bumper on the right side dent. About 8-10 inches high and about 8 inches wide. Cost of fixing? $200_$250
what is the size for the nut on 1990 toyota what is the size of the nut on 1990 toyota corolla's drive axle? 30mm Its a 30mm...I'd suggest using a deep socket 30mm.
Anyone know the size of the hub (spindle) nut on the front of 2000 Corolla (Prizm)? it is 30mm If it's 32mm make sure you undo the nut with plenty of leverage and 3/4 " drive.
what is the length of corolla 2002 the length of this 2002 toyota corolla from bumper to bumper is 174.0 inches, the width is 66.7 inches and the height is 54.5 inches, hope this helps.
inches (30mm) bolt (2) 1.38 inches (35 mm) Install the water pump (except XRS). Tighten the mounting bolts (1) to 80 inch-lbs (9 Nm). Tighten the mounting bolts (2) 8 ft-lbs (11 Nm). Install the water
Nesecito saber que clase de material debo usar para extraer el balero de la llanta de enfrente de un toyota corola 2001 Necesitaras acceso a una prensa, primero necesitas levantar el auto y ponerlo en
Question about 2001 Corolla Fielder
i have toyota fielder 2001 model car. presently i am using 15 inch rim ( 205/55/15 ). i want to fix 17 inch low profile rim. is it ok for my car ? if there is any problem or if u have any suggestion t
size of socket for axle nut on a 1998 corolla I show it is a 30mm (front) Bought a 30mm 12 point socket yesterday based on the most prolific answer online. Granted none specifically mentioned the year
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions