Questions & Answers for: Ford F-150 house md

Wipers do Not Work. Motor Good. Check the connection of the wiper arms to the rotating shaft. They might be stripped. They're usually splined, and corrosion sometimes wears away the splines. The motor

how to replace a thermostat on a 1990 Ford F150 xl lariat? CAUTION If the radiator is filled to the top with coolant and the engine is run without the radiator cap in place, the coolant will expand ...

how do u change the thermostat housing on the f150?? its a 93 straight 6..buddy broke the housing changing the thermostat and cant get the housing off to change it this simply requires removal of hose

i have a f150 with a pending code p0171 what can i have a 2000 5.4l f150 with a pending code p0171.. what can be done to solve the problem.i used a cardmd to check for any problems on my truck and ...

95 ford f-150 overheated. thought it was the thermodtat. changed the thermostat but is now leaking coolant from bottom of housing? THE T STAT FELL DOWN WHEN YOU WHER EINSTALLING THE HOUSING TAKE IT ...

1985 ford f150 fi 302 2 wheel drive, can't identify the rearend housing. Pinion seal is leaking and the shaft is little sloppy in the housing it has 165000 miles on it There should be a metal tag ...

how to install a distributor mark the old one with a scribe at the base of the distributor housing and the engine remove the distributor cap and mark the position of the rotors contact aligned at the ...

coolant leak around trans, housing. i have a coolant leak around trans. housing on my 92 ford f-150 v-8. truck was left over winter with only water in radiator. does not have to be running for leak to

HOW DO YOU PUT ON THE GASKET FOR thermostat housing ON 1990 F150 Find the upper radiator hose, and follow it to the engine. it connects to the thermostat housing. drain some coolant and remove the two

lower thermostat housing water dripping from the lower thermostat housing on the spark plugs causing the truck to misfire. how do i get to the lower housing to replace it? Part of intake manifold ...