Questions & Answers for: house Food Mixers

replace motor housing Before I get aggressive, is there any secret to removing the shaft from the lower housing on the 210 class Waring 3-head mixer? I can't believe someone hasn't answered this ...

Beaters Misaligned My beaters, at least where they lock into, are misaligned so that when one tries to operate the mixer the beaters will knock against each other. How do I realign these? When I look ...

I have a Kitchenaid Professional 6 Stand- up mixer. I'm attempting to replace the Worm follower gear that drives the main planetary drive shaft, but cannot figure out how to remove the original. ...

motor housing cap My unit tipped over and broke the top of one of the motor housings. I didn't think it would be a problem to replace so I took it off (3 screws) My problem is I've looked high and low

KSM5PS won't turn under load I was using the dough hook to make some bread dough - after a few minutes into mixing at low speed, it stopped turning. I shut the unit off and started it up again only to

trying to replace the gear worm on a kitchenaid mixer ksm5ps got some do-it-yourself instructions online accompanied by a couple rough pictures but for what seems to be a slightly different model it ...

Thumping Noise Under Duress I have a kitchenaid professional 600 (575 watt) stand mixer and I just replaced the 3 main gears because it was maiking an awful grinding noise. Now it runs perfect except ...

I cannot get the cord on my Dualit mixer to come out very far. I cannot get the cord on my Dualit 88520 hand mixer to come out more than about 15". I tried retracting it and trying again numerous ...

planetary housing fell off the vertical shaft has splines as does the housing .the part # is 9708036. ican not see any holes for a pin, no grove for a retaining pin, nor is there any threaded hole for

The speed lever of my KSM90 will not stay off. To get the housing off, I have removed the rear housing, the metal band, and four screws under the housing, but the housing will not come off. Is there ...