Questions & Answers for: hotpoint wma76 problems

Question about WMA76 Front Load Washer

1 Answer

Hotpoint WMA76s Hey FunkyBoogy, Wondering if you could help please. We have the above Washing Machine, everything seems ok, except it has started to overfill then comes up with an error that in the ...

Ad

WMA61 Hotpoint Washing Machine 'Red Tap' symbol is flashing The troubleshooting guide for this problem says it means the machine can't fill., and to check water supply is turned on and hoses not ...

Ad

Question about WMA76 Front Load Washer

1 Answer

Hotpoint WMA76 Ultima 6kg Hi, I set the machine going on a 40 cycle on Sunday and found the next morning that it wouldn't drain. Neither would it start up a new cycle. I could still get it to spin ...

Question about WMA76 Front Load Washer

1 Answer

Hotpoint ultima wma76 p when it comes to the water rinse or spin it does not drain out. Instead it comes out from the door. Ive seen the rubber on the inside of the door bent over, maybe that is why ...

Question about WMA76 Front Load Washer

2 Answers

...WMA76 is extremely noisey on a spin cycle only. The problem is getting far too loud. It is only when there is a load inside (no clothes-no noise) I would of thought drum bearing at fault, but im no ...

Question about WMA76 Front Load Washer

1 Answer

Brushes have about 20 mm left would that stop machine from spinning? it has the carbon type brushes fitted I would not expect the brushes to be the cause of the problem in your case. More likely to be

Question about WMA76 Front Load Washer

1 Answer

light of a red tap flashing light of a red tap hot-point ultima WMA 61 washing machine This is indicating a problem with the water supply, check the inlet hose/s for a restriction or kink in the ...

Question about WMA76 Front Load Washer

1 Answer

We have an Ultima WMA76. We can't get the door lock light to go out and stop beeping, even though the door os locked shut. Can anyone help. Decka I have the same problem, did you manage to resolve ...

Question about WMA76 Front Load Washer

2 Answers

wma76 hotpoint need a hot water feed? Is a cold water feed enough? Hi from retired Englishman in France (it's 21:29!), If your washer has 2 pipes for feeding water then one is for hot and the other is

Question about WMA76 Front Load Washer

1 Answer

no spin cycle Hi, Make sure door mechanism is working at fine. So next is to check whether the motor tumbles both directions. The spin bearing might be a problem, but normally you'd hear a problem ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...