Questions & Answers for: Whirlpool hotpoint washer shakes

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

hotpoint washer hi i have a very old model hotpoint washer g157. the agitator will not turn and makes a noise. it spins fine and the water levels are fine. thanks in advance joan These older units had

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...washer shakes when spinning and has error code F/dl and F11 some times stops at end of cycle Shaking is caused by poor distribution of clothes causing an imbalance. Try the machine empty. If it works ...

Ad

Question about Duet GHW9150P Front Load Washer

2 Answers

...washer shakes so badly, that it sounds like it will fall through the floor. I tried sitting on it.(it threw me in the floor) This is after I made sure it was level. What now? ok " if you take top off ...

Question about Duet GHW9150P Front Load Washer

1 Answer

final spin cycle, the washer shakes alot like it's off balance, however, the clothes are evenly placed in washer. Why is the washer shaking alot? GHW9200LW same problem, going to call tommorow and ask

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

...washer shakes my whole house The spin cycle is going to shake the beams loose in my houseand my washer moves halfway across the room remove the shipping material...read install instructions that came ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

Washer shakes violently when spinning at high speed. The uL code comes on and I have to redistribute the clothes to balance it. I always lay the clothes in a balanced pattern but the clothes ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...washer machine shakes badly when cycle whirlpool washer machine shakes badly when washer is spinning water out at difference cycles or just last spin. The problem could an improper leveling of the ...

Question about Gold Duet GHW9400P 3.8 Cu. Ft. Front-Loading Washer

1 Answer

washer lost all its shakes with the mechanics properly lubed. From the factory the mechanics were never properly lubed. Tight mechanics that are supposed balance the spin cycle by moving could be part

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

will shake in high spin there were 2 pins that drop from bottom of washer don t know were thy go.I need to put them were thy go, also when washer is on high spin it will shake very hard. These pins ...

Question about Ultimate Care II LSQ9564J Top Load Washer

2 Answers

...Washer tub shakes so much must stop washer O Your load is out of balance. If you have a heavy item, spread it around the tub to balance the load. It is normal for the tub to shake during the spin ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...