...Hotpoint's test equipment and Hotpoint are not helpful, i do have the ability to correct the fault once told where to look (have i missed something) signed Mick Mick, I faced a problem like that in ...
...Test" displays no washing done! hi there; Im having problems with my hotpoint washing machine. When I turn it on and set up my usual programme and press start the windows displays "test" then does a ...
hotpoint wf860 hi , my hotpoint wf860 1600 spin wont go through a program. the screen comes up with test and wont do anything else. if i leave it with test on the screen, it goes through a short spin ...
Ultima WF 840 HELP!!! My machine keeps running a test spin. Every time i try to select a different wash cycle it defaults back to test on the display and runs through a test cycle but doesn't use any ...
Question about Ultima WF860 Front Load Washer
...hotpoint ultima super silent displays 'test' but dnt run cycle when i request any wash the machine goes to start then test comes up on the display it seemss to go throough the prewash wash rinse and ...
Question about Ultima WF860 Front Load Washer
...hotpoint washingmachine WF860 comes with the message tESt The message tESt appears on the display screen then the machine spins for a few minutes without water and then it stops. please can you tell ...
Question about Ultima WF860 Front Load Washer
...hotpoint WF860. When i switch on and select reduce creases it shows time to end as 1.15. then when i select start it shows test. what to do as there is no mention of this in troubleshooting in the ...
...hotpoint wf860g off test mode To exit the DEMO/TEST mode, press and hold down the "On/ OFF" and "Start/Cancel" buttons until "d off" is displayed The test mode should only realy be displayed when the ...
...hotpoint ultima wf860 washing machine when trying to do a wash it just keeps saying test what is wrong with it ????? SomeHotpoint's are designed to go into test mode when the start button and the ...
...test mode i have a wf860 Hi from retired Englishman in SW France, Here are the instructions to clear the 'test' depending on the date code:- Date code 39 March 2005 Press start/cancel until ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions