Questions & Answers for: hotpoint ultima noisy spin

Question about Ultima WF860 Front Load Washer

2 Answers

hotpoint super silent ultima machine. During the spin cycle its so noisy and loud you have to leave the room, the feels that it is slightly loose as when you move it with your hand it makes a knocking

Ad

Question about Ultima WF860 Front Load Washer

2 Answers

hotpoint ultima wt960 washing machine noisy on spin This machine is very noisy on spin cycle. Any ideas? Many Thanks Bearings faulty or another fault this model suffers from is the concrete balance ...

Ad

Question about WMA64 Front Load Washer

1 Answer

hotpoint ultima extra 64 finishes its cycle but the door stays locked for at least half an hour afterwards. The drum is also really noisy/clanky when spinning (fast or slow). I don't think the two are

Question about WMA64 Front Load Washer

1 Answer

...hotpoint ultima extra the machine works well. but it wont spin then i try again and the same thing happens. thank for any help in this matter could be a couple of causes.First take off panel at back ...

Question about Ultima WF860 Front Load Washer

1 Answer

...spinning Remove drive belt and spin drum by hand, if it is noisy, or feels rough, then the main bearings have failed, if no noise, then check for noisy motor bearings. Please rate my solution.

Question about Ultima WF860 Front Load Washer

1 Answer

hotpoint wt960 ultima, very noisey when on spin Remove lower rear panel of washer, remove belt and spin drum by hand, if it is noisy or feels rough, then main drum bearings have failed. If no noise, ...

Question about Ultima WF860 Front Load Washer

1 Answer

noisy spin possible bushes ? Hi, Check out this tip I wrote about that... http://www.fixya.com/support/r3663122-washer_problems_washer_noise_when heatman101

Question about Ultima WF860 Front Load Washer

1 Answer

...HOTPOINT ULTIMA WASHING MACHINE wt960 is very noisy on the spin cycles...is there a need for oiling or what else can I do..? It could have an imbalnce in the drum because the load is uneven, or your ...

Question about Ultima WF860 Front Load Washer

1 Answer

...hotpoint wt960 belt is intact was getting very noisy before it stopped. now cannot move it with your hands looks like your bearings have gone if you can not move with hands looks like you need a new ...

Question about Ultima WF860 Front Load Washer

1 Answer

hotpoint ultima washing machine wma74 drum not turning programme start fills with water but drum will not turn or spin If the machine wasn't excessively noisy before and when you select spin only you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...