Questions & Answers for: hotpoint error code h20

Question about Ultima WF860 Front Load Washer

1 Answer

HOTPOINT ERROR CODE H20 either a blocked filter or tap not turned on

Ad

Question about Ultima WF860 Front Load Washer

1 Answer

error code h20 came home to a flooded kitchen, had put an uneven load in. Water continuing to fill the machine yet error h20 on the led. Eptied water out. Turned off machine at mains. put more washing

Ad

Question about Ultima WF860 Front Load Washer

1 Answer

...error got a hotpoint wt960g with error message h20. checked inlet and outlet pipes - all seem ok checked clear piping going to the back of the tray. any other suggestions? Hello I used to get this ...

Question about Ultima WF860 Front Load Washer

1 Answer

have code fo8 AND h20 come up, any ideas on the I have code fo8 AND h20 on my hotpoint wd640p washer/dryer come up, any ideas on the fault, and how much it'd cost to fix? Error code means no hot water

Question about Ultima WF860 Front Load Washer

1 Answer

error code hi my hotpoint washer dryer wd860 wasn't emptying of water or would empty but within minutes was filling up again so after removing the back the filter and checking the drain pipe we ...

Question about Ultima WF860 Front Load Washer

1 Answer

...Hotpoint, Ariston) Error code H20 (Quote)'If the machine is not in the demo mode and this error is displayed it means there is no water being supplied to the machine. To cancel press and hold ...

Question about Ultima WF860 Front Load Washer

1 Answer

ERROR CODE H20 That is a pressure valve problem. Have an authorized Hotpoint service person look at it. It usually is a small transparent hose that dislodges or ruptures.

Question about Ultima WF860 Front Load Washer

1 Answer

hotpoint aquarius wmf 740 has error code h20 Just had same problem with my hotpoint wmf740 showing h20 and found an easy fix was to clean out the detergent draw thoroughly and just behind it.to remove

hotpoint wmf760 aquarius + error code h20 coming up error code h20 keeps coming up i have checked the pipe and that is fine You may have soap & grease in the pipe that leads to the pressure switch

Question about Ultima WF860 Front Load Washer

1 Answer

...error code h20 which in the manual says a problem with the water feed which I find strange when it is filling. Any ideas please? I noticed the washed dose this if I run a bath sounds daft but it's ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...