hotpoint aquarius dwf30 dishwasher my hotpoint aquarius dwf30 dishwasher is washing with cold water its not heating up i have been told it may be the element.What is to stop me plumbing it in to the ...
...cold or hot water fill? I have recently relocated the machine and have been silly enough not to take notice when disconnecting the taps! if there are 2 hose connections then it is hot and cold fill. ...
hotpoint wd440 aquarius will not let in hot water? only cold through the soap dispenser then starts cycle Not all programes fill with hot water.Try on 95 degree wash if it takes hot water ,you are ...
hotpoint aquarius wd640 my boiler has broke so could you tell me if my washer drier is a hot or cold water fill Most washers made today, are cold fill only, best way to check is look at rear of washer
...Hotpoint WD640, a cold fill only version, and a hot and cold fill version.. From your question, I conclude you have the hot and cold fill version, which requires a hot and cold fill supply.. I do not ...
Question about Aquarius WD63 Front Load Washer/Dryer
valve (hot and cold on the same valve - but different solenoids) some have seperate bodies for the hot and cold. Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question
hotpoint aquarius wf 640 We have the above washing machine which is fed with hot and cold water, But due to moving the machine to another room we no longer have hot water pipes in that room, is it ...
...aquarius 1100 - does this have a heating element for cold water feed ? or does is need direct hot water feed ? (there is a inlet at back for both hot and cold so presume no heating element ?) All ...
Question about Aquarius WMA42 Front Load Washer
...hotpoint aquarius require hot and cold supply to washing machine Depends on the model, and when it was manufactured. If there is only 1 inlet valve connection at rear of washer, then it is cold fill ...
hotpoint aquarius will not heat water Hi, Although I do not know your particular machine I strongly suspect that the heater element is malfunctioning/broken. Even if it is a hot and cold fill it still
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions
