Questions & Answers for: Whirlpool no hot water

Question about GU2400XTP Built-in Dishwasher

2 Answers

...hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being ...

Ad

Question about Estate TAWS750PQ 27-Inch Washer

1 Answer

...hot water runs continuously The washer's hot water continues to run even when the machine is off, I had to turn the water valve off to the washer. The Cold cycle works fine and even when I put it to ...

Ad

Question about Estate TAWS750PQ 27-Inch Washer

1 Answer

...hot water for your d/w comes directly from your hot water heater. Sometimes the pipe length from the hot water hearter is very long, so when you turn on the d/w it's filling up with the water that 's ...

Question about GHW9400 Front Load Washer

1 Answer

...hot water and no cold water entering on the machine. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on the valve need electricity to mechanically open the ...

Question about GHW9400 Front Load Washer

1 Answer

Hot water does not work. Repairman said we have to run hot water in sink to get water hot in dishwasher. Is this correct? yes espically if your hot water heater is on the opposite of the house. When ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...hot water disconnected because we do not use hot water. thats when the machine stopped working. hook up hot hose and turn on the hot water and dont use hot water control it will not use no hot water ...

...THE FILTER IS HOT TOO WHAT IS THE LIKELY CAUSE OF THIS EXTREEM TEMPERATURE CHANG? Are you sure that your water line is hooked to cold water. It sounds like you are hooked up to hot water and not

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...hot water valve no hot water into tub. checked inlet valves. cold water terminal gets 120 v when turned to cold water. hot water valve terminal gets 0 when set to hot water. do I need a new dial? The ...

...hot water in my Whirlpool Cabrio washer. Getting a humming sound when selecting only hot water, but no water. Cold water works just fine. hot water solenoid control not opening hot water not coming ...

Question about Ultimate Care II LSQ9549L Top Load Washer

2 Answers

...hot water filling washer on all settings Whirlpool ultima II washer SM8525079 Cold water valve already replaced have you replaced the hoses? it's a good idea to do that every few years anyway (they ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwasher Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...