Questions & Answers for: how hot is my iron

...me? Audrey The thermal cutoff device blew and must be replaced. It acts like a fuse when the iron gets too hot. Thay are very cheap and it would be well worth replacing. Hope this was helpful. ...

...getting hot The thermal cutoff device blew and must be replaced. It acts like a fuse when the iron gets too hot. Thay are very cheap and it would be well worth replacing. Hope this was helpful. ...

...hot iron. Hi, Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it. Electric Iron not Heating Up or not Working Right ...

...iron the handle gets very very hot and is to hot to touchmany thanks keith you just open it and look for whats wrong in your iron.... or the handle in it is not compatable in the iron soo put some ...

...You can pull out bigger pieces with tweezers or similar. But be careful since the iron is hot! Hope this helps. I do this roughly every month or two to keep the iron from leaking on my

...hot so no steam (iron works fine) I have had this iron for 5 months and only been used 4 times. When I turn it on , there is water leaking out of the iron and the handle is too hot to touch after a ...

...iron too hot for a synthetic fabric and the fabric melted to the sole of the iron. How do I remove it? pan scrub or brillo pad soft wire wool you could heat the iron up and use hot soapy water on a ...

...Hot flat iron will not heat up My iron comes on and the heating dials light up and blink but the iron never gets hot nor the lights turn solid. Suspecct failure of the heating element, use a ...

...iron get hot is the large cable from machine to iron carrying water and should it get hot Hi, If the iron is a steam-iron with a steam tank in the base-unit, then steam is carried up the connecting ...

...to burn. It is the teal Pro Express generator iron? sounds like an electrical fault in the handle take it back for a warranty exchange or refund Iron handles do not get hot only the sole plate ...