...hot glue gun to glue it to the plastic piece on the base that pushes in on the plunger on the water container. It fit perfectly on the round plastic piece. Works great now! Thanks for all the ...
...hot glue you can use theres also carpet glue if you know how to iron upside down use the carpet glue and an old iron that your going to want to throw away cause carpet glue is a little messy but it ...
...its hard plastic you would be amazed what a little clear silicone will do make sure you apply to both sides using a popcicle stick spreads it on nicely or try using a hot glue stick try it it will ...
...hot air is to melt the glue.. The connection in question is hard to access because it is between the fold so you have to remove some of the black tape before you can stick something between the folds ...
Question about 5"x36" White Bathroom Drop-in Bathtub Spa Jet
...hot glue to cover handle bottom and stick it to the jet button and hold it in place till sets (8 min) and pull. * Try not to put too much glue so it wont still to the sides of button hole. I had ...
...glue guns the sitting with a stick in them wile hot the stick will get hot enough to where the gripper that advances the glue slips try to bush it through some to where you can add a new stick in or ...
...hot melt glue stick (those used in a glue gun), if it melts the glue (but not too quick) it is hot enough. It is unlikely that the ribbon came loose from the LCD, but if the previous didn't work you ...
I have a Sears Craftsman EZ Fix hot glue gun and cannot find replacement sticks for it. Any help?? Here you go: http://www.sears.com/shc/s/p_10153_12605_00980485000P Best regards, --W/D--
...hot glue gun is a very useful tool for joining modelling materials and even more substantial materials can be fixed together with it. 'Sticks' of solid glue are pushed into the back of the gun, the ...
Question about Home Repair Kit Glue Gun Bond Mend Seal Caulk
...hot glue from a glue gun set to the higher temperature. Warm up the area slightly with a heat gun for a better bond and wait till the glue is good and hot. About 15 seconds after application, I ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions