...hot air?http://schematicsdiagram.blogspot.com/2011/12/car-heater-blowing-warm-but-not-hot-air.html---------A/C, heater, defroster fan, not ...
Question about 2001 LeSabre
...hot air only cold air i am thinking the flapper that controls hot \ cold is stuck in the cold air position cooling system and heater core recently flushed, a bunch of muddy water was flushed out but ...
...air then hot car over heating To troubleshoot this types of problem,click the link below :----http://howtobyme.blogspot.in/2012/02/heater-blows-only-from-defrost.html --------Go through the ...
Question about 2003 PT Cruiser
Air blows hot at idle? http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html ------------ Heater blows cold? http://schematicsdiagram.blogspot.in/2012/02/heater-blows-cold
side of blower heat comes out drivers vents cold out passenger vent This is becoming a known problem. The heater core is plugged from the factory it must be replaced. I am a service writer at a dealer
side trhows cold air. I have the same problem so I went to the dealership and they said that chrysler has a memo out for the problem. They told me that there was a bad batch of antifreeze and it clogs
Question about 2012 200 LX Sedan 2.4L 4-cyl. 4-speed Automatic
...HOT AIR FROM DRIVER SIDE AND COLD AIR ON PASSENGER SIDE, WE CHANGED THE ACTURATORS AND THE BOX ?? HELP CHANGED THE ACTURATORS AND THE BOX Only four things could cause this. A scanner would point you ...
Question about 2012 200 LX Sedan 2.4L 4-cyl. 4-speed Automatic
my chrysler 200 blowing heat out of driver side cold air on passenger side Fix your car right away by clicking the link I attached chrysler 200
Question about 2012 200 LX Sedan 2.4L 4-cyl. 4-speed Automatic
why my 2011 chrysler 200 heater is blowing cold air Deck water in cooling stems is ok ...it may be thermostat
Question about 2012 200 LX Sedan 2.4L 4-cyl. 4-speed Automatic
...hot air / passenger side is cold. You have actuators which direct the air in the heater/vent/AC system. My first cars used metal cables, then came along vacuum line control and most now use electric ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions