horn not working First check fuse. If fuse good you need to locate horns. You have 2. Either one is fine to check for power when you hit horn button. Between bumper & grill,underneath in engine ...
original horn got stuck and burn up, I installed original horn got stuck and burn up, I installed a new horn , when I plug the wire on the horn it will start to blow until I remove the fuse. What is ...
Hello I have a 97 mercury tracer ls. One day I went to blow the horn at a driver that had cut me off then the horn blew for a while on its own then stopped. Now it doesn't work. I want to know what I ...
...horn wont stop. i beeped at a friend one day and it stoped for 3 seconds and then started again by itself. so i hit it a few times and it stoped. 2 days later i was driving and it started by itself ...
My horn just stopped working. It won't make a noise when the steering wheel switch is pushed or it won't make a noise even when the panic button is pushed on the remote. I tried replacing the fuse-no ...
horn do not blow I DON'T KNOW WHERE IS THE LOCATION OF THE HORN ,TO DO THE REPAIR I DO NOT HAVE THE MANUAL BOOK maria you can buy an owners manual and a service manual, each about 10 bucks, on eBay. ...
...horn problem neither was it the relay but the contacts within the steering wheel that got stuck, u need to have this opened and poped back into position such that when not depressed there wont be any ...
horn goes off when cables attached to battery Try taking off horn cover and see if wirers are off or touching eachother
1993 mercury tracer horn wont stop- how do i disconnect it There are 2, flat metal connectors leading into the horn. Disconnect one or both. This will stop the horn, FOREVER !!!!!!!
fuse panel diagram horn keeps sticking check the wire of the horn its grounding off
Usually answered in minutes!
157 Questions
123 Questions
136 Questions
106 Questions
78 Questions
