Questions & Answers for: horizon e1

...e1-error.html Good luck. I have a Horizon Fitness Treadmill Model Sonic II - it has started to judder and i have to push the belt to get it started, which once its going its fine but today it started ...

Treadmill cuts out after 10 seconds and gives an E1 message. The treadmill powers up and runs for 10 seconds before it cuts out and gives an E1 error message. Any advice? Your problem might be that a ...

shows code E1 and will not start START OK NAD SHOWS E1 DEN STOP

after starting the treadmill 10 seconds later E1 apears on the display Your problem is that a magnet has fallen off. Here's an illustrated guide that should make fixing it easy: ...

Error E1 -what does that mean and how do I fix it? Also, does the treadmill need to be oiled? If so, what kind of oil and how? Your problem might be that a magnet has fallen off. Here's an illustrated

E1. The treadmill is a Horizon fitness T101 folding treadmill.. see the video and see what happen. Need to call to his supplier treadmills for fix it. LED Blink Patterns on the Control Board Treadmill

...E1 on the monitor. Had same problem. I called horizon and after troubleshooting, they could not solve and replaced the entire circuit board. I was under warranty , so i was fortunate to not ...

Horizon treadmill with E1 error, like models T101 and others from the years 2011-2013, there is one thing you can try. Unplug the treadmill and remove the motor cover to get to the Motor Control Board

...E1 error code on a horizon t101. check the speed sensor. Clean the dust on its surface if any. or align the speed sensor or replace it. If you wish to get some details; check the site linked here. ...

...horizon t101 treadmill makes a ticking sound on the control board and stops working with a E1 error displays I lubricate the belt, I loosen the belt and just have it run and after running for about 1 ...