Questions & Answers for: hoover windtunnel sucking

...Hoover.com site is useless in searching for a manual. Are you sure the brush roll is turning. If not sometimes it will appear to not be sucking. Take off the bottom plate, then you can get to the ...

Hoover vacuum handle attaching screws Vacuum arrived without any screws to attach handle to the unit. Are the screws a fine or coarse thread? I cqn subsitute something from my garage supply of spare ...

Hoover Windtunnel carpet level adjustment When I try to vacuum my oriental rugs (with the mat beneath) the vacuum is very difficult to push forward and seems to be grabbing the rug. It seems to vacuum

no suction how goes it.. my hoover windtunner v2 has no suction through the hose.. it does however have suction from the body, but once i put the canister in, it has very little through the hose.. no ...

The vacuum used to pick up great and now it doesnt want to what could be the problem? The hose that leads from the brush area to the bagless area is clogged. You will probably have to remove or ...

I just cleaned the beater brush area, turns fine, but it still will no pick up cat hair. Suggestions? In mine, I found a huge clog between the vac hose (not the one for your wand) and the beater bar ...

is stopped up .won't pick up. You did not say, but I assume that the vacuum is still running? Check under the machine and into the bend where it sucks up the dirt, see ig there is not something like a

...Hoover windtunnel has very little suction. I have cleaned the entire vacuum. Cleaned filters. My Hepa filter is a little torn, don't know if that could be issue. After cleaning it does suck a tad bit ...

need belt 38528- brush belt I just had the belt replaced at a sweeper shop. It seems each time I suck up a throw rug, the belt gets stretched out then the brush won't run. 1. Do I have to get a new ...