Questions & Answers for: hoover windtunnel shorted

...only turns on when I lay it down flat. When I lift up the handle, it shuts off. I took it to a Hoover repair shop and they said it was the hose so they put in a new one. I brought it home and ...

...Hoover Windtunnel U5753-900 shuts off during use, but not while using the attachment function. It's almost like it shorts out when I am vacuuming. Does anyone know why this is happening? I keep the ...

no suction the suction on the vacuum is very weak. What should i do? Check the hose for clog, take it off if you can, drop something thru it to see if it comes out the other side. Check the dirt inlet

...Hoover U6437-900 U6439-900 Windtunnel Upright seems there is a short in the power switch, is that possible, I have it disassembled and seems there is power going into the on/off button, but will only ...

...to stretch to the large wheel and the belt just seemed to short??? I purchased the flat belt from Hoover that says for wind tunnel, self propelled??? The belt number is 38528035 and it will stretch ...

My wind tunnelhas no suction when using the beater brush. Something is stuck. Can I fix it? If the hose has suction in the upright position, and the floor has no suction in the normal use position, ...

Hoover U8147-900 WindTunnel V2 Bagless Upright has sparks coming from motor housing Most bagless uprights are exposed to dirt being drawn through their motors and filtered afterwards. As a result when

my vacuum cleaner has power through the switch and through to motor but will not go .The motor has no short in the winding what can be wrong If you are sure voltage is going to the motor, then replace

...hoover-u6630900-windtunnel-selfpropelled-bagless-vacuum-parts-c-37315_37337_37584.html The little sensor should be in the round recess in the top of that assembly. When you are putting the cover back ...

...over the motor. Overheating motor causing an automatic shutoff. This is most commonly caused by an air passage that is plugged by hair or dirt. Hoover WindTunnel 2 Rewind Troubleshooting - iFixit