Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...Hoover U6437-900 / U6439-900 Windtunnel Vacuum. There is a hook on the bottom of the vacuum and @ the top by the handle as well. You may what to get a schematic or owner?s manual to see how they hook ...
Hoover self propelled upright Your answers seem so very clear. My problem is that the self propeled feature only works in one direction. I assume that there is a cable that controls the direction. Can
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Hoover Self-Propelled WindTunnel U6436-900 cable problem The Self-Propelled WindTunnel will not self propel. I am quite sure it has to do with the end of the cable line found just under the light. I ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Self propell not working, Real hard to push. Thanks, Dean HI, Try adjusting the cable which is in the front right side. There is a screw that you have to loosen and move the cable to and fro and then ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...Hoover Self-Propelled Windtunnel If this didn't help you, and the problem is still happening, please just use the add a comment form here on Fixya and let me know that you're still having problems. ...
windtunnel u6401-9rm and the self propelled switch will not flip into self propel mode. is there an adjustment on the self propel part? When installing the handle on this machine, you must be sure the
Question about Self-Propelled WindTunnel Bagless Upright VacuumVacuum
...self propel cable does not seem to engage when working the top handle. Is their an adjustment or repair I can do? you will have to replace the handle or the cable both of them wear out with time and ...
Question about Hoover UH60010 WindTunnel Self-Propelled Bagless Upright Vacuum
...hoover self propelled vac uh60010 new in box but out of warranty. Self propelled works in reverse but not in forward when I push the vac forward. Is their an adjustment that could be made to engage ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...Hoover Windtunnel self propelled vacuum and tightened the cable. The vacuum is very hard to push forward and the drive wheel turns slowly when I turned it over and turned it on with the handle pushed ...
Question about Self-Propelled WindTunnel Bagless Upright VacuumVacuum
control cable broke push and pull broke need instructions to install control push and pull cable Remove the handle assembly by removing screws and sliding off. Remove nozzle housing cover and unscrew ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions