Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Hoover Self Propelled Wind Tunnel Turbo Powered 7600 The thin belt too loose The small belt on my vacuum is too loose,I just replaced it 1 monyh ago ,is there anyway to tighten something up so my ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Hoover WindTunnel Self-Propelled V Belt I replaced both belts and still the thin V-belt is loose??? Is there an adjustment that I am missing? Hi, That is what was happening to my Windtunnel. Until I ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Hoover windtunnel vacuum belt How do I change the belt on a hoover windtunnel vacuum cleaner? It is the one that drives the brushes in the front. There are 4 screws that you need to remove. The belt ...
Question about U5753-900 WindTunnel Bagless Upright Vacuum
Hoover 5753-900 Windtunnel stopped working after about 2 minutes. I think the loose paint is stuck in the vacuum. I cleaned out the filters, but I think the problem is somewhere else. I need help Take
Question about U6630-900 WindTunnel Bagless Upright Vacuum
...hoover windtunnel will not turn.. I checked the v belt and it seems like its intact .. is it suppose to be inside the groove or just on the grove..it seems loose laying on the grove thats why the ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...nothing. Their is a small "idler" but their dosent seem to be enough tension on the belt. Any ideas? Did you order the correct size of belt? These are the belts you should have: Hoover Windtunnel ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
brush does not turn because belt is loose You need a new belt that isn't stretched. You can get a replacement here: Hoover Windtunnel Belts
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...Hoover Windtunnel vac, Model U6432-900, and the brush roll will not turn. The v-belt seems too loose to turn the brushroll. The flat belt seems to be tight and working properly. I replaced the v-belt ...
Question about S3765-040 WindTunnel Bagless Canister Vacuum
Hoover windtunnel t series belt is loose- roller brush doesnt turn. Its brand new belt is slipping. we bough new belts and putthem on same problem. Can not find solutio in manual. Is the belt supposed
...belt to fit my hoover wind tunnel cyclonic. i even ordered it from hoover. The correct belt is # 38528034 ( package # 40201200 ) This belt may seem loose when it is installed, because there is an ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions