Questions & Answers for: hoover vacuum powerhead working

...vacuum! What did he do? He put a different belt on it. He put a Rainbow belt on my Hoover that's thicker and doesn't have as much "give" as the Hoover belt. It's also a little bit wider than the ...

Hoover vacuum is a nightmare! I have had nothing but problems with it since day 1. The powerhead stops working if you try to lower the handle to vacuum. I took it in to be serviced and was told it sat

...Hoover WindTunnel Canister model S3639: I replaced the belt for the roller brush but the motor that powers it doesn't appear to working. The motor's spindle doesn't turn (and there's no smoke or ...

...powerhead down too hard and this will bogg the roller and cause the belt to fail prematurely. That all sounds very reasonable, except it wasn't the belt that was having problems turning the brush -- ...

...vacuum motor from any damage. The reset switch is a small red button located on the top of the powerhead. If pushing the reset button didn't work (you don't hear the motor), it's one of two things. ...

...hoover celebrity QS wuith the power head. I have only used the powerhead for years purchased in 75) I removed the powerhead to use the brush and the power does not come on but if I put the powerhead ...

...Hoover Canister vacuum has stopped working I have a Hoover Windtunnel Canister vacuum. The power in the head has stopped working. I bumped the head while vacuuming (lightly) and the motor shut off. I ...

...hoover duros, the vacuum was running fine but the powerhead kept going off. I would make a sweep with it and powerhead would be running and then next sweep powerhead would shut off. I had tried ...