Questions & Answers for: hoover upright height adjustment problems

...upright position, it will appear the the height adjustment is not working. What's actually happening is that the height adjust is easily moved so you can make any adjustment you want. When the handle ...

hoover problem the wheels on the bottom of my upright have come off , i have put them back on but i do not know where the metal clip should go and also the height ajuster for the wheels does not work,

Can I fix height adjusment? Height adjust dropped down(?) so even at highest setting roller digs into the pile of a typical height carpet (hard to pull back too). Despite explaining problem twice the ...

Hoover Windtunnel carpet level adjustment When I try to vacuum my oriental rugs (with the mat beneath) the vacuum is very difficult to push forward and seems to be grabbing the rug. It seems to vacuum

...height adj will not work you should get a new vacuum because this repair can cost as much as a new vac.also this is a common problem with the hoover brand I would get a sebo or an oreck they have a ...

...Hoover's authentic belts and you're buying it from Wal-Mart, make sure it's the correct one, otherwise it won't work right and/or it will give off a burnt rubber smell. One other thing you could try ...

...height adjustment has disengaged from its action below the hood of the vac, leaving the vac in it's lowest position. This does not allow any "AIR FLOW" under the head so it just draws down into the ...

...Hoover Model U6439-900)or how do I know if the tension is correct? There seems to be a lot of "play" in the belt and I'm wondering if that is the reason the brush roll only turns as the wheels turn, ...

height won't go on low carpet setting. Dial will go on medium and high, but not low. Make sure you're not trying to adjust w/ handle in upright locked position because thewre is a cam which raises the

Hoover Wind Tunnel Bagless problem with carpet hight adjustment When I try to adjust the carpet height on my vacuum I notice that nothing happens ... can I fix this problem myself? Hi There Alec from ...