Questions & Answers for: hoover u5753 suction

hoover it has lost suction Do you have suction at the hose end, if you do then it may be clogged at the inlet by the brush roll. Is the filter cartridge clean? If it is clogged and air can't pass thru

...Hoover U5753-900 WindTunnel Bagless Upright Vacuum. I have done a detailed check for clogs and found nothing. I have also cleaned the filters. It is as if the vacuum were not in the upright position, ...

i have low suction and there are no clogs. What is the valve you suggested. # 53 pic is to small to see There is a valve in you lower hose assembly and chances are its broken. It is supposed to stay ...

...hoover upright has no suction, the brushes move but it doesn't pick anything up at all Hi there... I had the same problem. Checked for obstructions, cleaned the filters, etc. ...

Hoover Bagless WindTunnel vacuum cleaner. Has suction but does not pick things up when pushing the vacuum cleaner. Brushes move and the hose suction will clean and pick things up. very easy. you have ...

I just changed the belt an dthe vacumn doesn't have any suction. Check the dirt canister lid and that the lock lever is in proper position

My wind tunnelhas no suction when using the beater brush. Something is stuck. Can I fix it? If the hose has suction in the upright position, and the floor has no suction in the normal use position, ...

the beater bar has stopped turning. Suction fine the beater bar has stopped turning. Suction fine but the brush that picks up the stuff has stopped turning. probably a broken belt. part # 38528-033

Suction not working on vaccuum. My hoover windtunnel vacuum is not picking up dirt and hair as it used to. The suction is clearly reduced.The bag is not full, the brushes work fine. What could be the ...

Hoover Bagless Windtunnel vacuum has no suction on the bottom, although the hose works. Everything else seems to be working properly. Check the belt, look like we have the same problem, I just unscrew