Questions & Answers for: hoover overheats

...hoover mach 5 stopped during use and will now not turn on If the machine overheats, a breaker trips. Most breakers reset themselves after they cool off. You may have a manual reset button to push on ...

...Hoover Wind Tunnel has a burning smell when running. I replaced the belt, but this didn't help. its clogged my vax does that burning smell when it gets clogged up thats for the five minutes before it ...

Does the motor overheat switch need to be replaced if it has tripped and reset on Hoover model u3940 Most of the Hoover overheat control switches reset when you UNPLUG the cleaner, and let is cool ...

I have a Hoover Wind Tunnel Supreme mach 3.9. It I have a Hoover Wind Tunnel Bagged Supreme mach 3.9. It keeps shutting itself offafter just a minute or so. Is there an overheat relay switch or ...

...overheats. Turn off, unplug and wait for 1 hour or more for the thermalfuse to "reset" itself.  Also, clean or replace all bags/filters because that's usually the cause of overheat in ...

Power issues Appears to overheat and shuts down Make sure all the filters are clean and that the bag is clean or put a new one in it. If there is poor air flow, the vacuum will overheat and cut out. ...

why is it my vacuum cleaner keeps shuting off after ten minutes. i have a Hoover wind tunnel uh70086 Sounds like it has an overheat problem and is shutting down to protect itself. Make sure the ...

...to turn off and then on and works for awhile. sounds like you need to take the side off and get the hoover round the inside...dust will build up round the fans causing it to overheat....i normally ...

where do i check for the fuse on my hoover windtunnel vaccum Most Windtunnels do not have a fuse but have a thermal reset in the motor which shuts the motor off it overheats.

troubleshooting Hoover smart vaccuum model H4012 would like to know how to take it to pieces My Hoover h4012 smart vacuum overheats and shuts down