Questions & Answers for: hook wall mount

...speakers for surround sound. The wire coming out of the wall is 4 wire,where or how does this get hooked up? i also have 2 wall mounted control units where do these get hooked up? THE 4 WIRES

...wall but cant find out where to hook it into the back of the tv. This black metal piece is in the way. Wondering where I would put the mount into if I even can. According to the manufacturer (and ...

Wall Mounting Exactly HOW do you reverse the handset hook (located on the base) to support the receiver in the wall mounted position? Slide it all the way up and out, turn it upside down and slide it ...

a blower you can hook up to the dyna-glo wall mount heater is there such a thing as a blower you can hook up? only if there is one for the particular model heater you have ck with dealer in your area

...wall mount installation the instructions say Push the handset hook up with your thumb, turn it over and replace it on the base. Please advise where I might find the handset hook !! It is a tab on the ...

...hook to the new wall. If there is no set screw or hole visible from any side, then your Gatco hook might be removed from the mounting bracket by twisting the entire hook counter-clockwise. If anyone ...

...hook it to the wall mount. At this point you can further adjust thepositioning horizontally to center it perfectly. Once the desired position isacquired, tighten down the screws that attach the ...

...hook up the wall mount on and over a wall area with strong woods beams supports have many fours by fours woods beams lumbers to take off the stress of the holding of the tv by those screws alone of ...

...one has a battery charger do a search on eBay for "garage storage wall hooks" as for the charger you might need to put it in a bag to hook it up. that will be the cheapest way. hope that helps ...

...all the same though, remove the front cover and remove the mounting screws, OR, you lift it off the hooks at the back. Make and Model are useful in such questions.

Question edited for clarity ...