...Hood latch is a bit tricky. Pull on the release lever and have someone bounce the leading edge of the hood. generally this will free up the latch. You can also try to spray a bunch of solvent up at ...
hood showing the routing for the belt. Tension is kept on the belt by a pulley called a tensioner. You will have to get the belt routed and then position the tensioner (usually using a breaker bar) so
hood release is how you open hood when inside hood release is broken See if you can take the inside hood release down from its mounting position,And hopefully the end that is defective is in this area
hood release handle is fully in. Sometimes they stick out and keep the latch from engaging. If it is in, then spray some lube on the latch assembly, such as WD-40, and cycle the hood release handle to
hood release inside the car the hood does not open. The cable is not broken but I suspect it is stretched to the point where it is no longer serviceable. How to I replace it? Latches out of align. Did
...hood still nothing. Also, it is stuck in park, so if I want to tow it how can I manually get it to neutral? All this after coming back from a vacation. fun. Not the best way to return but here is how ...
need to replace serpentine belt Open the hood of your Prizm and locate the negative battery terminal on the battery. Loosen the clamp bolt on the negative battery cable end with a wrench and remove ...
Question about 1996 Prizm
...hood release works but then the hood doesn't lock when I drop it back down When dropped, it only "locks" to the point where you can release it externally but doesn't go all the way down to lock. What ...
hood release cable replacement what this question, how to buy one, how to install it? (should be obvious)
how can I get the hood open when the release cable has broken? double posted and already answered.
Usually answered in minutes!
421 Questions
286 Questions
276 Questions
205 Questions
189 Questions