...honda karcher 5.0 pressure washer and i cant get it to spray any water or pressure out the gun at all? Why?? Hi, That is a on going problem with power washers the pump not working, than works ...
power washer v2500bought a upgrade pump, only get half the pressure now. tried adjustment screw, engine stalls hard to pull start also, unless water off first.no leaks found, any idea. if you bought a
...Washer General points to check if a problem occurs Are the engine and fuel switches in the ?ON? position? When troubleshooting, always check oil and gas levels. The oil for the pump is a 30W ...
...Honda pressure washer lasted only two uses and the pump froze up. If your water is that hard (and it appears it is) WD40 will NOT solve the problem. You should look into a water softener. However, ...
...power. The honda gx340 has a compression release built into the engine so it should be relatively easy to start. With the pressure pump under load however, it will be very hard to pull the rope. With ...
honda motor has become very hard to pull. It is on a pressure washer. I even removed the pump but still pulls hard.it runs if you can get it started but dosnt seem to be running at full power.I pulled
Question about Pressure Washer PSI 3000
...power washing and have several mechines with honda engines . And its always rebuild the water pumps the engines start first pull every time . I had to look at some of my manuals the mechine is likely ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions