...hold the Go and Job Cancel buttons. Turn on the printer and continue to hold the Go and Job Cancel buttons for approximately 10 seconds, but no longer than 20 seconds. During this process, the ...
...hold the Go and Job Cancel buttons. Turn on the printer and continue to hold the Go and Job Cancel buttons for approximately 10 seconds, but no longer than 20 seconds. During this process, the ...
Question about LaserJet 4350 Printer
...hold down when turning on the printer (like in the older machines to reset the maintenance count) to flash the memory. or do i need to do a firmware upgrade? Your help is much appreciated If the ...
Question about LaserJet 1320n Printer
...job simultaneously it only prints one and the other has to be done manually. anybody with an idea how i can correct this please help. You may need to add memory to the printer so it can que the jobs. ...
Question about LaserJet 2420 Printer
job is sent from the computer: ● Proof and hold jobs ● Private jobs Make sure that you identify your jobs in the printer driver before printing. Using default names might override previous
...job on 'hold'. I tested printing on normal A4 and that's fine. FYI: Paper size 10cm x 15cm (landscape) Any ideas? Cheers check to see if there is a custom size option on the page setup on the print ...
HP P2015dn setup in a language lab, serving multiple computers via a network. If the printer is off for most of the day, when it is turned on, the backup of jobs starts to print. How can I clear the ...
job and it will not clear Hello, and thanks for using FixYa. Okay, seems like the spooler is stuck, here is how to get it to reset. Hold down the windows key and press R in the run mene write (without
job activity. To print a Configuration page, press and hold the Go button for 5 seconds. To print a Demo page, press and release the Go button If Blinking: The printer is processing or receiving data.
...1 Turn off the printer. 2 Press and hold the GO and CANCEL JOB buttons. 3 Turn the printer on and continue to press and hold the buttons until all three LEDs are blinking. 4 Release the
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions