Questions & Answers for: Garmin nuvi hold job

Question about nuvi 750 GPS Receiver

1 Answer

...hold in on it for 3 minutes to allow the reset to do it's job then put in the battery and then plug in the unit again and try to run the garmin again and see what happnes if nothing than i would ...

Ad

Question about Nuvi 465T Car GPS Receiver

1 Answer

...hold down the power button for about 15 seconds and the gps receiver will restart, this time it will load normally and show you your maps. If that does not solve the problem, then you need to back up ...

Ad

Question about nuvi 255W GPS Receiver

1 Answer

...hold down the power on/off for about 15 seconds, that should do the job. If that does not do it, then calibrate the screen, to calibrate the screen, follow the steps below: Turn off your nuvi, Press ...

Question about nuvi 780 GPS

1 Answer

...hold down the power on/off for about 15 seconds, that should do the job. If that does not do it, then you have to calibrate the screen. To calibrate the screen, follow the steps below: Turn off your ...

Question about nuvi 205 GPS Receiver

1 Answer

...job, then hold down the power off/on button for about 10 seconds, the device restarts, that way it should work, but if it does not still work, the only solution is for you to jeep calibrating the ...

Question about Nuvi 660 GPS Receiver

1 Answer

hold down the power on/off for about 15 seconds, that should do the job. If that does not do it, then calibrate the screen, to calibrate the screen, screen calibration do not just work once you do it,

Question about nuvi 255W GPS Receiver

1 Answer

job for you. To calibrate the screen, follow the steps below: Turn off your nuvi, Hold the upper left corner of the screen, then turn on the nuvi, Release the power key once the garmin screen appears,

Question about nuvi 255W GPS Receiver

1 Answer

...on my garmin nuvi 255w If your garmin nuvi 255w in not getting any signal try to reset the unit by holding the power off/on button for about 15 seconds, that way it will restart the unit and it will ...

Question about nuvi 205W GPS Receiver

1 Answer

...do not safely remove the gps device, just pull off the USB cable and power it on. Reset the unit by holding the power button for about 15 seconds, then it will restart, once it restarts, it will ...

Question about nuvi 255W GPS Receiver

1 Answer

...hold your finger on the screen for about 30 seconds until the calibration screen appears(white screen with touch dot), Then follow the on screen instructions.That should do the job for you. hope this ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...