Questions & Answers for: Sony hold down

hold down the button with a circle through it. if it is a brand new player, then make sure the hold button is taken off the on position, making the device unlocked. Then try turning it on. try holding

...down takes it off hold and turns it back on. When off (hold switch on) pressing buttons will display a message that says "HOLD" That alerts you that it's OFF and not dead. Go to this website. Enter ...

...facing you, on the left side there is a small button-like "Hold" control which slides up and down. When you slide it down, "hold" is off, and when you slide it up, "hold" is on. Hope that helps you! ...

...try with power switch at back off hold down eject button and switch power on at back while holding eject down . hold down eject button with power switch on and power on ps3 normally while holding ...

...hold down the enter key and the number of the mode its stuck in ie if its stuck in dvd-1 mode hold down the enter key and then the 1 key. hold both buttons together for 3 seconds. After this go back ...

..."Hold" switch. Now press "Option" and hold down while entering the following w/the direction pad: up, up, down, down, right, left, up , down, up ,down, right, play/pause Hope that helped Dr ...

...hold it down until you hear a second beep (it will beep once as soon as you press it). The console should stay on after the second beep and the display should initialise. Try this method with both ...

...HOLD DOWN the Power button. It will beep once. DO NOT LET GO and continue to hold it down. It will beep a second time. After it beeps two times while you are holding it down (never let go), it should ...

...screen Tried just leaving it. Holding down power button, but still on shutting down screen when turned back on. If you press and hold the power button for up to 15seconds that should close it

...down. Then, press and hold "Volume +" for roughly 3 seconds. While still holding "Volume +", then press and hold Power for an additional second. Use "volume -" to arrow down to the factory reset ...