Question about MultiPASS F60 All-In-One InkJet Printer
hold power button. 3. Connect power. 4. Close door, then release power button. or Step 1: Manual Temporary 1. Turn off the printer. And disconnect the printer cable. 2. Press and hold the POWER button
hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable. 2) While holding the ON/OFF button, release the Resume/Cancel button. (DO
...Hold the Power Button, release the Resume Button. Not releasing the Power Button, double click "Resume" and release Both Buttons. Click "Resume" for Four times Once you click "Power", to confirm the ...
hold Power ON button 4. While holding the Power ON button, release the STOP/RESET button 5. While holding still the Power ON button, press twice the STOP/RESET button 6. Release the Power ON button 7.
Question about PIXMA MP160 All-In-One InkJet Printer
...hold Power button. 4. While holding the Power button, release the Stop/Reset button. 5. While still holding the Power button, press the Stop/Reset button twice. 6. Now release the Power button. (wait ...
...Hold the button "Resume" (red circle in the triangle) and push "Power" button. 3. When printer become ready hold the button "Power" and release button "Resume". 4. Push button "Resume" 2 times and ...
...hold the power button. While continuing to hold the power button, release the resume button. Still holding the power button, click the resume button 2 more times. Release both buttons. Click the ...
...hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.2) While holding the ON/OFF button, release the Resume/Cancel button. (DO ...
Hold the button down for about five seconds. 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds. 3 Release "Stop/Reset" while holding down the "Power" button
hold in power button to turn off, then hold in power button and keep holding in until printer starts and then turns off. that should reset it(clear any registered faults). it should now start ok. Make
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
