...red temp My projector starts up several times before the power light turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any ...
...after I switch on the projector after a few minutes lamp and power indicator get red and flash then picture vanishes Red lamps flash but picture doesn't disappear. 100hrs remaining on filter
...lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red when i switch on the ...
Question about ED-X8250 Multimedia Projector
...Hitachi ED-X8250 - I've read a few similar problems as mine on here, though none have a solution. I recently changed the bulb in this projector as the lamp light was red, but it seems that no bulb ...
...projector will not come on. the power light blinks green, then goes to red. the "lamp" light looks like it is coming on dimmly (red) you need a new lamp: ...
...Hitachi CP-x206 3LCD Projector. I turn on projector, it flashes green light on power button trying to turn on but will not now. Eventually a red light comes on the power and Lamp button on top of ...
Question about Cpx2510 Projector Cpx2510 Xga Projector Lamp
...hitachi cp-251. powers up, no light. power led and lamp led are red 1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast ...
Question about CP-X327 Multimedia Projector
...projector is Hitachi cpx1 XGA 3LCD and it has failed to display. the power and temp lights are red but the lanp light shows nothing. Call hitachi service center to fix it. It may have a circuit ...
Question about CP-X327 Multimedia Projector
...Hitachi CP-X605 projector. When turning on my projector the power light flashes green for approximately 60 sec. then the Lamp light turns red, and the power light flashes red. Nothing is projected. I ...
Question about CP-X327 Multimedia Projector
...hitachi LCD projector when I connect it to power the power lamp turn on red. When I push on standby bottom no lights are on all off like it's turned off I replace the lamp with a new original lamp ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions