Question about Advent Q2035A 20" TV
button on the remote in case I did accidently change something. We have had some thunder & lighting storms lately, does this sound like it could have been hit by lightning? Any help or advise would be
Question about Advent RCS110A Remote Control
...button (eg TV). The indicator should blink off. [4] Point Remote at device (eg TV). [5] Press the Power button on/off down until the device turns off. [6] Press the ENTER button or OK button to save ...
...hit a button on the remote with another remote and it locked it. I never set it and cant find the book help me please i have model dv2020a television and it is locked. i cant unlock my television. i ...
...touch a button , itthe screen goes from blue to green and shuts off. what could be wrong? Hi!! Kindly check the power supply setion if their is a defective resistor or semiconductor device..thank
Question about Advent DV1418A 14 in. TV/DVD Combo
Cable and power and volume problem First the power button on my remote stopped working. So I got a universal remote. I pushed a weird button on that one and now my tv is squiggly and has asian writing
wrong with the other two on the back??? Hi! Try connecting the wires to the same colour jacks and also chekc for AV button on the remote which is sue to switch the TV between AV 1 or AV 2 mode. Thanks
tv cable connected to the back of the tv/dvd combo and pulled the connector from the back of the tv. Is this a cheap fix and worth the trouble? Yes this is a cheap fix that should only cost between 15
...hit something on one of the remotes (either the one for the direct TV, or the remote that came with the set) It was showing a blue screen, now it is just snow. I called the direct tv support we did ...
...Cable). The selected device button will flash once. 4- Release CODE SEARCH. 5- Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). ...
...tv If the antenna has a cable like cable wire--hook it direct to the cable fitting on the set.If the antenna uses the flat type wire (called 300 ohm twin wire) use an adapter that will connect to the ...
Usually answered in minutes!
95 Questions
46 Questions
21 Questions
16 Questions
8 Questions