Questions & Answers for: Panasonic hit wrong button cable tv

wrong socket. As the the aerial passes through each device, the device adds its own RF channel to the feed, so you should be able to tune both a SAT/Cable and a Video/DVD channel onto the TV set aside

...TV, with the same results. It's not the cable signal because sometimes I come home early from my meeting and will flip the TV on to watch it while it's recording also. Viewing the DVD later, I will ...

...hit every button on the remote with no luck. I don't think the lamp is bad, as I can hear the sound, and see glimpses of a picure when hitting some buttons. Any suggestions? After fooling around with ...

wrong button Press the TV/VID button until you see picture, then remember the input. it has vid 1 vid 2 component 1 & 2 and HDMI then TV. You are currently on "TV". If you still have an issue post

...wrong? I just bought a samsung BD-P4600 and I tried to connect with a Philips Plasma TV. What channel do I need to put it on for it to show? if you are using basic cable to the back of the tv, you ...

...wrong? If you have snow that means you've either lost the signal source (cable satelite antenna) or the TV tuner is bad or your not on a recievable channel. Try hooking a signal to one of the video ...

...there. The tuner is located directly behind the cable connector(threaded connector)located in the rear of the TV where the cable or antenna connects to, it solders vertically into the main

hit the power button. The tv clicked on, but didn't come on. Instead the power indicator flashes 4 times repeatedly. I then held the power button in for about 10 seconds. After this, the power

...tv just went off all at once to nothing it just looks like snow on it thats it and we have it hooked up to cable and was viewing it at the time snow is an indication of signal failure either from the ...

...hit the channel up/down button on the Panasonic remote and it changed the channel on the tv to #63-1. How do I change it back? Now it's off cable When I pressed the button again to get it back to ...