Question about SC20145 20 in. TV/VCR/DVD Combo
...cable, there is no screen, no power light on, but a high frequency noise continuously. What's the problem? it's something wrong in power supply or other parts? Please email: [email protected] Thanks ...
SET TV WITHOUT REMOTE NEED TO SET TV IN CABLE MODE WITHOUT REMOTE. BROKSONIC-CTGV5463TCT Press and hold both volume buttons at the same time to enter the menu then use the volume keys to select CH SET
...remote for t.v. , hit the button under the sleep timer button on remote, and eventually the closed cation words will be removed from the bottom right corner of t.v. Hope this helps , good luck
...TV and set it to receive the signal from an ANTENNA instead of CABLE or SATTELITE". All I find in the menu screen is "Add Antenna". I can't get any reception for any channels - it's all snow. Help! ...
...wrong voltage or abroken contact, identified an internal fault and kicked in , starting the flashing light. If you are in situation one, then the TV will reset just unplugging power cord for one or ...
Question about CTSGT9369CTT 19 in. TV/VCR Combo
where is the menu botton to change it to cable tv we need to set the tv on cable tv This TV is made by Emerson. You will need a remote with a menu button.
Question about CTSGT9369CTT 19 in. TV/VCR Combo
...cable. The Broksonice tv I have does not have a remote. There is no menu button on the tv. I have a Phillips HD indoor antenna with black box and remote. It does not respond to the Broksonic tv; only ...
...up TV, use the remote to select input hdmi1, hdmi 2 etc. Use hdmi1 for cable box. The menu on your TV should allow you to set the cable box as default so every time you power on the TV cable is
...TV cable ready? Under the menu settings, make sure tv is set to CATV and not Air. CATV is for cable. Then look for tuner options or channel edit options. Find the "autoprogram" option and select it. ...
...hit power button and all i got was a black screen unplug for a whole day and still nothing. hi there, it seems your TV is not that complicated to remedy. Try to check the power cord for any cut or ...
Usually answered in minutes!
62 Questions
60 Questions
48 Questions
39 Questions
34 Questions