Questions & Answers for: Char-Broil hing pin

...under the burner between it and the flang of the bottom of the grill. It's a messy and difficult thing to remove. Somehow I was able to wiggle and pull it out with my fingers, assisted by a ...

im rebuilding a char-broil master flame 7000, and i need to know how to get the burner off. there are a few lock pins and some spring looking things and i don't want to mess anything up. so how do i ...

where do you hook the sideburner ingintor wire to? You connect the wire to the pin on the bottom of the peizo ingnitor (it looks like a 3/4"' needle) . The sleeve on the end of the wire should just ...

I need to replace the fire bowl in my 4 bunner grill. Assemby drawings do not show how to remove just the fire bowl from the surrounding structures( i.e. side frames) with the grill fully assembled. I

How do you remove the burners so I can clean out the gas ports? The fairly simple to remove. Turn OFF the gas, Remove the cooking grates and flame deflectors to access the burners. On the end of the ...

Which way do the burners attach on a King Griller Stealth Model#3008 I mounted them ignite side down and used channel locks to flatten the metal ears and attach the coterpin simultaneously ... worked ...

I just bought the small Char-Broil American Gormet Smoker BBQ and Grill. The lid doesn't close tightly. One side of the gill is about 1/4" to 1/2" open while the opposite end closes ...

I am a female and putting together my first bbq....how does one attach the hitch pin to the hinge pin.....urrrrg Hi stephlive4u... You will remove any clips,pins,etc from the pins you will be ...

where is the cotter pin on the charbroil quickset model 463811905 where the gas tube attaches to the back of the adjustment dial

unable turn ignition the left ignitor knob is very difficult to turn, can I just pull it off and try cleaning more thoroughly? This happened to me once, and I discovered that I had the knob on wrong. ...