Questions & Answers for: high limit fryer switch

...times it will reset and sometime it takes a little longer before it will allow you to reset the high limit switch.HELP! The high limit switch itself is getting weak , replace it and problem

...high limit switch. If it is a small red button mounted to a 2" x 2" or so device. You most likley have an issue with the thermostat letting it over heat. The best thing to do would be to replace both ...

...high limit light flashes and go back off emediatly, and no power comes back on. i can here a click in the board behind the front panel but see no resets for high limit. all conections seem to be ...

...limit switch/ device on fryers acts as safety device. It cuts gas supply on burners when it is triggered by high oil temperature in case the temperature regulating device failed to avoid further ...

...high limit button. Don't know if the problem is the themostat or high limit switch. Sounds like the thermostat is working because it does heat to the right temperature, right? The high limit ...

...high limit switch, or both. When hot enough, it produces an electrical current that keep the pilot on and allows the main gas valve to open. Be sure that you have a good pilot flame. The pilot may ...

high limit switch, or both. When hot enough, it produces and electrical current that keep the pilot on and allows the main gas valve to open. This is not hard to replace in most gas fryers and not too

high limit switch, or both. When hot enough, it produces and electrical current that keep the pilot on and allows the main gas valve to open. This is not hard to replace in most gas fryers and not too

high limit switch, or both. When hot enough, it produces and electrical current that keep the pilot on and allows the main gas valve to open. This is not hard to replace in most gas fryers and not too

...high limit light comes on when the temp is turned up and the limit switch does not need reset. When you turn up the temperature the high limit and heat light comes on but it does not heat. The light ...