Questions & Answers for: high beam doesnt work toyota

high beam doesnt work 2000 toyota camry i think that it mite be the high beam relay due to the fact if i by pass the relay and put 12 volts to the high beams they both work any ideas? Some cars have a

When I pull lever of high beam there is no light at all. But, low beam is working fine. replace the switch, hi/low beam

...lights. Both left and right went out suddenly and at the same time. High Beams work okay. Is this a bad dimmer relay? YOU HAVE TO REPLACE DRL RELAY AND THE DIMMER SWITCH IS BAD IF YOU ONLY HIGH

...beam would not work on one of the headlights. If you have the HID bulbs, and there is moisture in the bottom of the assembly, the high voltage box at the bottom will not work. this requires removing ...

...has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it

beam headlights seem to degraded, dealer has adjusted aim twice but still have very poor lighting on low beams, have to drive with high beams as much as possible. Trying using a lens renewal kit and a

...no success it is probably the high beam relay or possibly the switch. The relay is easier to try, just swap it with another relay to test it. If it still doesn't work, then it's probably the

Low beams sienna But high beams work help. Fuse maybe? Maybe a fuse but more than likely the bulbs are burnt out and need replaced.

...high beam indicator light would come on, even with the low ones on. There seemed to be a slight flickering just after turning the lights on. Turning and moving the switch on the column had no effect, ...

...high or low beam all other lights work high and low beam do not work Re: Condensation in Sienna Right Headlight.... - Toyota Sienna Forum ...