Questions & Answers for: hide screws Refrigerators

...with a workshop manual for the renault mondus 1.4 expression. Under the black plastic cover that hides half the engine department. You need to remove some torx screws in order to get access ...

Ad

...hide screws everywhere. Sometimes they cover a screw with a thin plastic disk so you can't see the screw. Also on some TVs the PC connector has 2 tiny bolts that need to come off. Check around where ...

Ad

Question about i850 InkJet Photo Printer

1 Answer

...hide these screws under metalic labels to see if someone has attempted to open. Another is sometimes in addition to screws, there are plastic "latches" to pry loose without breaking. The last hint is ...

Question about i850 InkJet Photo Printer

1 Answer

...hide screws, if positive all screws have been taken out then there is only plastic clicps holding the back on. Find the join between the front panel and back and gently slot a flat but strong item ...

Question about MEMOIRS 48X34 SHOWER RECEPTOR K-9547-S2

1 Answer

...the head of the the screw to be flush with the nailing flange. does the tile hide the screws YOU CAN USE SCREWS OR GALVINEZED ROOFING NAIL IN THE FLANGE,YES ,THE DURAROCK SHOULD SLIDE OVER THE ...

Question about MEMOIRS 48X34 SHOWER RECEPTOR K-9547-S2

1 Answer

...screw, green and white to center screw. or white to center and green to screw holding cover that hides

Question about 1999 Bonneville

1 Answer

those screws hide very well in that also so look good. Be very carefull when prying on door panel in case of a missed screw and beware of wiring for electric windows and mirror anjustments if equipped

Question about S3670 Bagged Canister Vacuum

1 Answer

...where the hose plugs into the canister. I have found 4 screws under the trap door where the bag hides, two are easy to get to, but the other 2 are under the trap door either requiring the trap ...

...under window switch and door latch, feel around bottom of panel for screws, take off any small covers that hide screws, mostly they are held in by plastic pins, gotta pull pretty hard to get

...hide cables on rear, or just hides the steel mount.
and the magic 4 screws on it. then pry it.
steps 1 to 4, page 10







the pr ytools are; in order of best to worst ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...