Questions & Answers for: Radio Shack hi scan pro

hi i have a pro-82 scanner and i just wont pick up any signals any more not even the weather channel signals whats wrong with it go to cityfreq.com and see if the frequencies in your area have changed

...Hi - You can download the manual from the link underlined in blue below: Pro-95 Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck! to get ...

...talk groups in but can't get it into an ID scan mode. Hi, my name is John. Just L/O the ones you don't want, then SCAN..hope this was helpful Please rats this solution on the thumbs four thanks ...

...scan again. Thanking you in advance for your help. [email protected] Hi, my name is John. Press the FUNC and hold down the L/O button until it beeps twice......hope this was helpful..Rate this ...

...do you unlock the channels?? Thanks in advance for your help. Hi, my name is John. Welcome to FixYa. Press the FUNC. button then press the L/O button, then press SCAN. Thanks for choosing ...

scan it says all channels locked out ..the instructions in the manuel seem to be no help at all. how can i unlock all channels? Hi, my name is John. Welcome to FixYa. Press HOLD, then press FUNC, then

pro-2096 have static no talk Hi dh, my name is John. Welcome to FixYa. Turn the SQUELCH until the static stops, then press the SCAN button. Thanks for choosing FixYa....John

i have a radio shack pro 135 and it wont scan justs makes noise but it will if i press scan it will change channels?? hi have you tried turning the squelch fully clockwise

Hi. Check on eBay. You need a standard BNC connector antenna for this scanner. Radio Shack scanners are made by Uniden so a Uniden BNC antenna will fit your unit. Here's a link for an antenna on eBay:

Hi - I don't know any frequencies to enter on my PRO-94. Is there a way that I can just scan all local channels? You can run service searches as described in your manual to locate active frequencies, ...