the torque specs for a 1999 4.6 liter northstar camshaft cap bolts Hello: The following is straight from the 1999 4.6 service manual----Install the bearing caps according to the identification marks. ...
where is the thermostat located? Hello, Under the hood on the driver side follow the lower radiator hose to the engine remove the fitting (2 bolts) and the thermostat is there.
...Hello: There is no top bolt, remove the bottom bolt, pull back and up, Slide the top off the long shaft then remove the two bolts to remove the fixture that holds the caliper and pads If installing ...
Hello: I don't know of any free information unless you join a website called AllData but I can explain where the thermostat and Waterpump are located on a Cadillac Northstar engine. Thermostat: Follow
how do you get to the firewall side, very bottom bell housing bolt Hello: You access this bolt(15mm) with a 2 ft or more extension using a 15mm wobble socket.
...bolt holds the water pump on a 1989 4.5 litre caddy sedan deville Hello: There are 3 15mm bolts 10 10mm bolts and two round bolts with a star insert in the bolt head (like a allen head only this star ...
...Hello: First remove the plastic covers at the front and rear of the seat tracks (do it carefully so you don't break them) then remove the bolts in the rear (move the seat all the way forward) one on ...
...stuck key back in switch now the key won't come out and its not in the lock position what to do Hello: you need to connect the battery to remove the
...Hello: The starter is towards the drivers side on the bottom of the the engine in front. There is a black plastic shield that covers the rear portion of the starter. Under the plastic cover is 2 15mm ...
what is a 2000 deville oil pan bolts torqued too? Hello Tommy, recommended oil pan bolt torque is 128 inch-pounds. I hope this helps.
Usually answered in minutes!
1,356 Questions
1,298 Questions
1,226 Questions
1,118 Questions
921 Questions