Questions & Answers for: heavy duty cycle starts

heavy duty cycle. My washer overflowed (I had the level switch between tow settings). Now it works , but only on the heavy duty cycle. When I try on the other duty cycles when it starts on the agitate

...Heavy Duty Washer Leaking from bottom Hi we have a kenmore heavy duty washer. Serial #CE0702916, model # 4564290 and it it leaking water when running a cycle. It seems to leak througout the whole ...

...heavy duty cycle,but it pops the breaker within 2 minutes of starting,i changed the motor and it worked for 2 months (in the heavy duty cycle only)before it started popping the breaker again. I would ...

...heavy duty 8 cycle washer serial # XC 81393222 model # FWSC235RF worked great until now. timer stopped during regular wash cycle. won't rinse or drain but starts washing again in each of permanent ...

heavy duty will fill with water and start the washing cycle but when it gets to the drain and rinse cycle it wont go any further on any washing cycle The lid switch controls the rinse and spin cycles.

Heavy duty Cycle does not work properly, or will not come on. Sometimes it strains and causes lights in room to dim in unison with agitator, or will not come on at all in heavy duty cycle, but this is

...heavy duty cycle then machine wouldnt drain so I fixed the timer and it seemed to be working. I went to unload machine it spun out the wash cycle but did not pump any cold water into rinse cycle. ...

...HEAVY DUTY" (If unsuccessful LEDs will not flash, and you must return the selector to the Normal Cycle position and wait 4-5 seconds before retrying. ) If you are successful in the process, all LEDs ...

...Duty & Heavy Duty Dec 8, 2011 - F350 6.4 L 2008 Wont Start after Fuel Filter Change Super Duty & Heavy Duty. ... My only suggestions are change them again or take it to Ford. ...Rancho 9000 ...

...heavy duty? Heavy duty cycles causes the motor to overheat then it does this stop and start thing. Checked the coupling work and motor seating, all spins as freely as I guess it should. Ran a cycle ...