Question about P4VMM2 Motherboard
...heat sink for cleaning. The processor was stuck to the heat sink, and I damaged some pins. My damaged cpu is a P4 2.66ghz/512/533 for 478 socket. I am searching for a replacement and was wondering if ...
...heat sink and fan may not be enough to cool the processor. The only way that a 3GHZ would run was if you updated the bios and personally i would not recommend it. You would be better advised updating ...
...heat sink. It looks like yours will most likely have the pain in the butt be careful not to 'get it on the edge" If you dont get the brackets on solid, when you try to connect the other side it will ...
Question about (RK80532PG0881M) Pentium 4, 3 GHz Processor
...heat sink, applied about a pea-sized plop of paste in the middle of the processor and put it all back together. I assume you don't need to spread it all around and that the force of the contact tends ...
Question about CELERON 2.66Ghz CPU AND MOTHER BOARD (CPU4266CEL) Motherboard
...heat sink to avoid any damage, heat sink design may varies depending on the manufactur if they use a diff heatsink design, then unlock the cpu by lifting up lock lever beside the socket, carefully ...
...heat sink, which is contacting the CPU (Pentium 4?). That size will probably be 50mm but my recommendation would be to determine what socket type you're using -- and with this information, you can ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions