Danby micro: turns, lights, doesn't heat it heated milk for 30 minutes last night, then did not heat at all this morning. Heating for that long may have damaged the magnetron. I would suggest you ...
...of paper towel and lay it over the sticky residue and turn the unit on high for 20 to 30 seconds to heat it. Then use a plastic spatula to scrape it off. The heating should loosen it up and the ...
microwave serial # xr2004675 superba heating microwave serial # xr2004675 superba heating food - explosion while in heating process- open door - door heavy - small curved piece falls out should we use
Microwave oven does not heat anything. Clock, turntable, lights work. I turned the turntable off while the oven was cooking--heard a noise, now it doesn't heat anything. Spacemaker XL 1400 worked for ...
Question about JVM1870 Microwave Oven
ge jvm1870 it won't heat anything, all other items work it quit working when baking a potato Ok, if this unit has stopped heating, this will confirm a major fault within the Magnetron. this device is ...
MICROWAVE IS NOT HEATING mY ge SPACEMAKER XL1400 MICROWAVE OVEN IS NOT HEATING, BUT EVERYTHING ELSE WORKSA. THE KITCHEN SMELL LIKE SOMETHING ELECTRICAL IS BEING BURNED HI, the actual device that ...
Question about R-1870 Convection/Microwave Oven
microwave seems to work but doesn't heat up The microwave seems to work (light goes on, plate rotates, counter counts down) but it doesn't heat up. HI, when the Magnetron becomes unstable, the ...
Question about R-1870 Convection/Microwave Oven
Microwave seems to work but does not heat food Microwave looks like it's working, lights come on table turns usual humming noise, but does not heat the food and after a while shuts itself OK, you may ...
Question about Appliances Over-the-Range Microwave Oven
M/N GLMV168KS4 - makes a rattling noise when heating food, but otherwise heats properly. All other functions are working. Any ideas of the problem? It can be a sign of dying magnetron and possible ...
MAIN OVEN IS NOT HEATING UP 1. Check power supply 2. Check male plug for possible damage 3. Check thermal fuse for possible damage 4. If magnetron is damaged, replace the unit the magnetron is most ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions