Questions & Answers for: Pontiac Grand Prix where are the heads on a engine

rear head gasket how much **** do you have to take off to get the rear head off a 90 grand prix with a 3.1 and i need to know if i have to pull the motor forward or not to get it off cant help onj ...

heads and gasket lasted about five years. I was wondering what the correct head bolt torque is for a 1995 Pontiac Grand Prix with a 3100 engine and do I put sealant or oil on the bolt head and threads

engine head torque specs table Go to autozone.com create a free account put in you cars model year etc... then look at the free manual for replacing head gasket it will have a bolt tightening sequence

want to know the amount of torque pressure do i use when tightening the head bolts, and whats the sequence? To install: Fig. Cylinder head bolt torque sequence-3.8L engine Install the new cylinder ...

...heads. When an engine overheats, the head warps a little. It doesn't take much to change the internal pressures on the gasket, and when the gasket area between the cylinders starts to lighten up a ...

...engine block and heads not the hoses if none there check hoses if its in the elbo as they said i assume they mean the one where the thermastat is located those are 19.95 at advance auto, maby cheaper ...

3.8 v6 engine diagram In this case i suggest you few help links. Click the link below.Pontiac car Repair guide? ...

Upper Engine Seal Have a feeling that my head gasket is worn out along with my upper engine seal. There is a slight coolant leak coming out of upper seal sometimes and as far as i've noticed ...

How do I get to the cam sensor? Most early 2 thousands GM models have twin cam sensors. One mounted on the front of the cylinder head and one at the back of the head.(4cyl engines) On V6's and V8's ...

Have oil gunk in coolant reservoir, just started. Can hear hiss. Head gasket? 216K on engine, runs near 212 marker on temperature gauge, used to run at 3/4ths of that. Had to replace fuel pump ...