Questions & Answers for: HP DesignJet head open

...open. However this sounds like your carrage is not running. You firstly need to check the belt. Look at the belt, is it not shredded or visually perished and letting off a lot of pinkish pieces and ...

...open the tinted glass and slide the carriage over. This should allow the carriage head with spectro instrument to be brought into view for inspection of an lint or dust, etc. To restart the printer, ...

...& message appears open the door then open the door & remove the head lock & remove the printheads during this process no power off ????????????/pls reply thanks ...

...head is what the cartridges sit in inside of the printer. For resolve the problem please follow these. Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug ...

...head is what the cartridges sit in inside of the printer. For resolve the problem please follow these. Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug ...

open the print head!! pffff. I have the same problem Print head blinks, while its a brand new genuine HP print head - it worked yesterday, its out of order today for no reasons, nobody can help? Hello

...head carriage from moving from side to side, or the drive belt has snapped. Open the window and check the black belt that runs the width of the printer. Check both ends carefully because often the ...

...head  open top cover of the printer open print head cover remove print heads clean print head contact pcb as well as carriage contacts insert print heads back then check for the print head ...

...head so when you print again it is ok for the first part of the plot and then gets to the air bubble. Open the back door of the plotter and look for air bubbles in the ink supply lines. If air is ...

...have a float operated valve in them like a toilet tank. The float is a tiny plastic bag with air in it. When the bag leaks it doesn't float any more and the valve stays open. Replace the print