...head open fault! I have had a quick look at the machine but cannot see any causes. I do not have a user manual for this could you point me in the right direction or would i have to call an engineer ...
...head open" does this require a new print head? This is due to the microswitch on the left hand side. Either the small flag is not present or the head doesn't press correctly or the microswith is ...
...head open problem PRİNTER gives 'head open' alarm Problem comes from two micro switches. One on the left of the head and the second on the rollers at hte back. Ensure that le lever at the ...
Question about B-882 Thermal Label Printer
...get an 'open-head' message. All sensors seem to be in the right place There is a micro switch at the back which is responsible for this error.Either you strap it or place the lever at the top ...
...HEAD OPEN ERROR If you are sure that after putting in labels the head knob has been completely turned clockwise, thus locking the head in operating position, then most probably your head sensor is ...
...Head Open" even though it is closed. We have removed and replaced the stakes and shut the power on and off and still have the error and can not get it to do anything else. The head open is generated ...
If this happens, repeat step 3. 4. Press the RESTART key. The printer will go back ON LINE. 5. Open the print head and reposition your labels, so that they are ready for printing. Close the print head
head Lever to free position. Then open the ribbon shaft holder plate and the print head block Remove the media and ribbon. Don't try to use any sharp tools and implements for doing this as these might
Question about B-4700-I/O-QM Thermal Label Printer
head open" any ideas why please? error message "head open" any ideas why please? Check the microswitch on the leftside of the print head. Sometimes a part is missing or the print head is not
Usually answered in minutes!
112 Questions
92 Questions
42 Questions
28 Questions
16 Questions
