how do you replace crankshaft position sensor? i think the sensor is located in the dizzy
...to time a 1995 nissan maxima engine. same wat did u do to make u do the timeing az thay r not over head cam. so if u did head gasget u dont nead to do the timing. timeing how to set check the crank ...
blown head gasket It may be easier to remove the engine to get to everything you have to remove to replace a head gasket on this model. It has a timing chain that has to be removed then the intake ...
I have a 1991 Nissan Maxima xls. The head gasket has been relaced 4 times in 5 weeks and it looks like it is time for number 6. On all occassions it looks like it went at the rear of the gasget. Well ...
leak 1990 nissan maxima just need gasket diagram you most likely have broken studs in your cylinder heads. those studs hold the manifold to the head, buut after a while they will break and you have to
is there any other problems I need to check besides a blown head gasket , when I have water in the cylinders but not in the oil pan? more than likely head gasket just check for cracks in cylinder head
How do I fix a 1990 Nissan maxima head gasket? to "fix" a head gasket requires taking off the cylinder head and associated compnents, getting the cylinder head serviced to ensure flat surface and no ...
I poured water in my radiator and its coming out the oil dip stick. What does that mean blown head gasket. do not start the vehicle until this is fixed. running with a blown head gasket can lock up ...
torque setting head 2002 nissan maxima Hi there:Fig. Cylinder head bolt loosening sequence - Altima & Maxima 3.5L engineInstall the cylinder head bolts and torque in sequence as follows: Step 1: ...
Question about 1997 Maxima
how do I remove the front head on my 1997 Nissan maxima v6 3000? how do I replace front head gasket on my 1997 Nissan maxima? Here's a link on removing the head to replace the head gaskets. SAVE 20 ...
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions