Questions & Answers for: Saturn head bolt torque

...head bolt torque for 95 SOC saturn. im having valve guides replaced The torque spec are as follows, step one is 22 ftlbs then step 2 is 33ftlbs and the third step is to tighten bolts 90degrees more ...

...head bolt specs for a 94 saturn sohc Hello jakeslonewo, I just did one of these today and the procedure is as follows. If you are using new head bolts (Recommended) install the head and toque the ...

torque specs.for head on a 2000 1.9 saturn there are 2 different 1.9 engines, so for future ref, you need the 8th digit of the VIN number. use NEW bolts. torque to 22 ft lbs. then turn 90 degrees, ...

...head bolt torque specs for a 1996 saturn sl Quote: Originally Posted by norvelplagbao52 1993 saturn sl2 1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: ...

...head bolts Hoe do I torque the head on my LW200 2.2 Ist thing, you should replace the bolts with new ones. Tighten main bolts 1 thru 10 to 25 ft pounds. Next, tighten bolts 11 thru 14 to 37 ft

torque specifications for head bolts on Saturn 2002 vue w/2.2 cylinder head bolt torque specifications Try looking it up on this Saturn site

bolt The head bolts are t.t.y. that means Torque To Yield. the bolts must be tightened down to a set point, then tightened to a set degree point. You must find this specific number for your engine....

...head bolt torque spec on a 94 Saturn sc1 with an 1.9 engine You will need a torque angle gague to properly torque these bolts. The torque for a SOHC engine is 22lb in correct sequence on the first ...

head gasket bolt pattern for my 1994 saturn sl1and torque for each bolt really need the help thanks Almost any time you need torque & bolt spics, go to auto zone they can look it up & print it

...with a new gasket and new cylinder head bolts. Torque the long bolts, in sequence to 46 ft. lbs. (63 Nm) and the short bolts to 43 ft. lbs. (58 Nm) plus an additional 90 degree turn on all the